Main Page | Recent changes | View source | Page history Printable version | Disclaimers | Privacy policy

Not logged in Log in | Help

Panasonic KX-TD and KX-TA Series

(Redirected from Panasonic KX-TA308)

Categories: Panasonic | Pbx

Default programming code for panasonic is 1234.

KX-TDA Series : KX-TDA30 KX-TDA50 KX-TDA100 KX-TDA200

If you are willing to use the USB driver for call accounting you must be aware that the original Panasonic USB Driver does not supports this. There are thridparty commercial drivers that could do that. If you are interested please contact us.

Open the KX-TDA Maintenance Console and go to:

• Maintenance > SMDR
  • SMDR Type: TYPE C
  • Outgoing Call Print: Print
  • Incoming Call Print: Print
  • Intercom Call Print: Print
  • Log-in/Log-out Print: Print
  • ARS Dial (Automatic Route Selection): Dial after ARS Modification
  • CallerID Print format: Name + Number
  • DDI/DID Print format: Name + Number
  • Secret Dial: Print dialled number
  • Privacy mode: Print Dialled Number
  • Date Format: YY-MM-DD - named as international format
• Maintenance > Miscellaneous
  • RS-232C: Baud Rate: 19200
  • RS-232C: NL Code: CR+LF
  • RS-232C: Word Length: 8bit
  • RS-232C: Parity Bit: None
  • Error Log Information Print: Print
• System > Date & Time
  • Change the date and time to current ones.

KX-TD and KX-TA Series (newer)

• go to the main console (Extension 101) and put it to programming mode by moving the switch on the phone to programming position.
• Press *#xxxx where xxxx if the password for programming. This is usually 1234 or 0000 or 9999. Please do not contact us if you don't know the password because we can't help you. You should contact the one that had installed your PBX.
• [800] - RS-232C Communication Parameters: CR+LF, 9600, 8 bits, mark parity, 1 stop bit.
• [801] - choose 0 (skip perforation)
• [802] - incoming on and outgoing on
• [803] - choose to print the speed dialing
• [805] - choose account code report to be code or index.
• [806] - choose English language reporting
• move the programming switch to the original position

KX-TD and KX-TA Series (older ones)

• The programming switch is located on the PBX unit - open the cover and you'll find it and move it to programming mode.
• [23] - Duration time count star mode: instantly (can be configured in the software)
• [24] - SMDR Communication Parameters: CR+LF, 1200 bps, 7 bits, mark parity, 1 stop bit, 66 lines per page, skip perforation 0.
• [26] - Outgoing: ON, Incoming: ON
• move the programming switch to the original position

View source | Discuss this page | Page history | What links here | Related changes Main Page | About Call Accounting Wiki | Recent changes |   This page has been accessed 707 times. This page was last modified 08:06, 23 October 2008.